top of page

SINGLE POINT LUBERS

AUTOMATIC LUBE SYSTEMS IS PROUD TO BE A DISTRIBUTOR OF ATS ELECTRO LUBE PRODUCTS

buynow transparent

  The classic ELECTRO-LUBER™ series was developed in 1982. The ELECTRO-LUBER™ is a single point automatic lubricator that uses an electro-chemical reactor cell which converts electrical energy into safe, inert nitrogen gas. The gas is contained in a hermetically sealed bellow-type gas chamber. ATS Electro-Lube was the first company to use this self-contained auto luber technology and sets the industry standard. As the gas is produced, internal pressure builds up in the bellows and is applied against the orange piston. The piston then forces the lubricant out of the cylinder and into the point of lubrication. The unit can empty from between 15 days to one year, depending on the setting of the simple user-programmable DIP switch. This selection can be changed or turned off at any time.

  The Electro-Luber series can be filled with any lubricant and used in virtually every work environment.  Our lubers are intrinsically safe and approved for all explosive areas.  They are also certified by MSHA for use in mines.  They can be filled with food-safe lubricant and will work underwater up to 30’ (10m) deep!

  Our units are simple to use, effective and drastically reduce the risk of bearing failure by ensuring that your machines are continuously lubricated with the right amount of lubricant at the correct time.  ATS’ Electro-Lubers have been saving clients time and money for over 3 decades!

CALL US AT 844-582-3797

OR SALES@AUTOMATICLUBESYSTEMS.COM

FOR INFO OR PRICING 

 FEATURES & SPECIFICATIONS

  • Self-Contained, stand-alone, single-point auto-luber

  • Continuous lubrication using safe, inert, nitrogen gas. Continuous lubrication of bearings prevents intrusion of foreign matter, slows oxidation, aids in dissipating heat and ensures a constant supply of fresh lubricant

  • Available in 4 sizes: 2, 4, 8, or 16 oz. (60, 125, 250 or 475cc)

  • Pressures up to 50psi

  • Approved for all explosive environments. Certified Intrinsically Safe for Class 1, Groups A, B, C, D, E, F, and G. Also certified by MSHA and Energy, Mines Canada for use in mining. ATEX certified units also available.

  • Multiple settings to empty from 15 days to 1 year

  • Suitable for indoor/outdoor use

  • May be remote mounted to 3’ (1m)

  • Filled with any customer-specified lubricant

  • Temperature Range: -40°F to +132°F (-40°C to +55°C).

    • NOTE: Low-temp lubricants must be used at low temperatures

 SIZE AND DIMENSIONS

  • Jumbo-Luber: 6-3/4" high X 4-3/4" dia.

  • Budget-Luber: 6-1/8" high X 4" dia.

  • Mini-Luber: 5-5/8" high X 3-1/8" dia.

  • Micro-Luber: 4-7/8" high X 3-1/8" dia.

 BENEFITS

  • Consistently precisely controlled lubrication

  • Virtually ANY lubricant can be used

  • Safe for use in all conditions, including food-safe and all hazardous areas.

  • Intrinsically safe, ATEX/UL certified

  • Dispensing of lubricant is not affected by ambient temperature or fluctuations (within lubricant and luber parameters)

  • Reduces workplace accidents by safely working in dangerous or hard to reach areas

  • Can be remote mounted for safety and convenience

  • Extends equipment life by reliably lubricating

  • Prevents lubricant contamination

  • Reduces maintenance costs

  • Eliminates downtime for costly repairs

  • Simple installation without tools

  • The original, most trusted units on the market!

buynow transparent
bottom of page